GlowShift | Install Guide for 2014-2019 Chevy/GMC 6.6 Duramax

2014-2019 INSTALLATION GUIDE GlowShift.com © GlowShift Gauges, LLC | All Rights Reserved CHEVY / GMC DURAMAX TABLE OF CONTENTS SECTION 1 Boost Gauge Installation 1 SECTION 2 Pyrometer EGT Gauge Installation 2 SECTION 3 Transmission Temp Gauge Installation 4 SECTION 4 Fuel Pressure Gauge Installation 6 SECTION 5 Installing The Pillar Pod 7 SECTION 6 Connecting To Power 9 • Safety Glasses & Gloves • Assorted Wrenches • Socket Set • Flat Head Screwdriver • Phillips Screwdriver • Center Punch • Marker • Drill & Drill Bits • Tap Handle • Multi-Meter/Test Light • Wire Strippers & Crimper • Panel Pop Tool • Cutting Oil • Pick Tool • 3 Gauge Wiring Kit • 3/8” Quick-Connect EFI Fuel Line Adapter • Transmission Test Port Adapter for GM Duramax Allison 1000 • Transmission Line T-Fitting Adapter for GM Duramax Allison 1000 • Zip Ties • Grommet • Drain Pan • Teflon Tape • Wire Connectors • Anti-Seize • Transmission Fluid • Shop Vacuum • Pen Magnet • 5mm Allen key • 1-1/2” Hole Saw • Pipe Cutter • De-burring Tool • Tape Measure • Expandable Circuit Kit • 1/8-27 NPT Drill and Tap set • 18’ Pressure Gauge Sensor Harness TOOLS & ACCESSORIES NOT INCLUDED OPTIONAL ADD-ONS AND ADAPTERS SOLD SEPARATELY AT GLOWSHIFT.COM GlowShift Installation Guides are designed so that you don’t need to be a professional mechanic to install our products. Whether you’re a beginner or a seasoned pro, we’ll walk any Do-It-Yourselfer through every step of the process for installing our gauges, gauge pods and accessories. This custom gauge package is a popular combination gauge and pod set for the 2014-2019 Chevrolet Silverado & GMC Sierra with a 6.6 Duramax. Before getting started, confirm you have the tools and accessories below and let’s get to work. For MaxTow® Gauges, the wire colors on the gauge power harnesses are different than what appears in this installation guide. Additionally, for the Boost Gauge, please follow the same steps but instead of installing the brass compression fittings and boost line, thread the 1/8-27 NPT boost sensor into your desired location and tighten with a 22mm Wrench. Please note that in some applications additional adapters may also be required. Wiring Schematic Red: 12v Constant Source (+) White: 12v Ignition Switched Source (+) Orange: 12v Headlight Switched Source (+) Black: Vehicle/Engine Ground (-) CHECK OUT THE FULL INSTALL VIDEO FOR THIS DURAMAX: GLOWSHIFT.COM/1419DMAX

RkJQdWJsaXNoZXIy MTIxODAy