2008-2010 Ford Super Duty 6.4L Power Stroke GlowShift Gauges Installation Guide

5 GlowShift.com © GlowShift Gauges, LLC | All Rights Reserved 2008-2010 INSTALLATION GUIDE FORD SUPER DUTY POWER STROKE Rail Pressure Gauge Installation SECTION 4 1. Locate the PCM on the passenger side of the firewall. 2. Depress the retaining bar and remove the plug on the right-hand side of the PCM. 3. Using a flat blade screwdriver, unclip the cover to the connector exposing the wires. 4. Locate the Blue wire with a Brown stripe at pin number 39 and attach a sensor wire using a splice connector and run towards the firewall. 5. Locate the Green wire with a White stripe at pin number 9 and attach a Ground wire using a splice connector and run towards the firewall. 6. Reinstall the cover on the connector and plug the connector into the PCM, securing with the retaining bar. 7. Route and secure the Sensor and Ground wires to an available opening on the firewall, securing it with Zip Ties. 1. 4. 73 74 75 76 77 78 79 80 81 82 83 84 1 25 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 21 22 23 24 85 86 87 88 89 90 91 92 93 94 95 96 65 66 67 68 69 70 71 72 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 26 27 28 29 30 Pin: 9 Circuit: RE405 Color: Green and White Gauge: 20 Function: CTRL MOD. - POWERTRAIN# SIGNAL RETURN ENGINE (E-SIGRTN) (SIGRTN-A) Pin: 39 Circuit: VE727 Color: Blue and Brown Gauge: 20 Function: SENSOR - FUEL RAIL PRESSURE/INJECTION PRESSURE (FRP) (IPS) 9 SIGRTN RE406 Green/White Black 2 SIGRTN VREF 39 FRP VE727 Blue/Brown Green 1 SIG 22 VREF LE423 Green/Violet Blue 3