1992-1997 INSTALLATION GUIDE 7 GlowShift.com © GlowShift Gauges, LLC | All Rights Reserved FORD F-SERIES 7.3L POWER STROKE 15. 13. 18. 13. Insert the boost line into the Ferrule Fitting Adapter, thread onto the back of the gauge and tighten with a 3/8” Wrench. (Refer to diagram below) Note: Do not overtighten the Ferrule Fitting. 14. Plug the EGT Sensor Harness into the back of the EGT Gauge. (If used) 15. Splice the green signal wire from the Transmission Temperature Gauge to the green signal wire from the sensor. (If used) 16. Plug the Fuel Pressure Sensor Harness into the back of the Fuel Pressure Gauge. (If used) 17. Splice the green signal wire from the HPOP Gauge to the green signal wire from HPOP Gauge Wiring Harness pigtail. (If used) 18. Mount the pillar pod and factory trim assembly to the truck A-pillar, securing it with the factory screws. PROPER ORIENTATION
RkJQdWJsaXNoZXIy MTIxODAy